430 Stainless Steel Coil Factory Supplier

430 stainless steel for building decoration, fuel burner parts, household appliances, home appliances parts.
430 stainless steel is a general steel with good corrosion resistance. Its thermal conductivity is better than austenite, its thermal expansion coefficient is smaller than austenite, its heat resistance fatigue, and the addition of stabilized element titanium has good mechanical properties at the welding seam.
This is the most cost effective grade of steel. So the 430 Stainless Steel Sheet Price is lower compared to other grades of stainless steels and all metallic products in general. There are different versions of the material with low carbon and high carbon content. The low carbon version, 430 sheets are very good for welding applications as they have less carbide precipitation and less localized corrosion.

430 stainless steel is a commonly used stainless steel material. It is usually used to make tableware, kitchenware, home appliances and other products. Compared with other stainless steel materials, 430 stainless steel has a relatively low price, good corrosion resistance, and a certain strength and hardness. Therefore, it is often used to make tableware. However, it should be noted that the corrosion resistance of 430 stainless steel is poorer than other stainless steel materials and is prone to rust. Therefore, when choosing 430 stainless steel to make tableware, you need to choose good quality, smooth surface, and no scratches. Mark and rust-free stainless steel material to ensure the safety, hygiene and service life of the tableware

Equivalent Material

Grade Euronorm China GB Japanese JIS
No.
430 1.4016 10Cr17  SUS430

Standard Specification

Thickness 3mm-10mm
Width 20mm, 30mm, 40mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm, etc.
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc
Finish Hot rolled flat steel(HR), Cold rolled flat steel(CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats,
Blank (Circle), Ring (Flange) etc.

Composition Content

Grade C Mn Si P S Cr Mo Ni N
430 Min.
Max.		 ≤0.12% ≤1.00%  ≤0.75% ≤0.040%  ≤0.030% 16.00~18.00% / ≤0.60% /

Tensile strength σb (MPa): ≥450
Conditional yield strength σ0.2 (MPa): ≥205
Elongation δ5 (%): ≥22
Reduction of area ψ (%): ≥50
Hardness: ≤183HB

Characteristic machining technology

1D — The surface has discontinuous granular shape, also known as fog surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
2D – A slightly silvery white colour.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
2B — Silver white with better gloss and flatness than a 2D surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + quenching and tempering rolling.
Ba – Excellent surface gloss, high reflectivity, like a mirror surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + surface polishing + quenching and tempering rolling.
No.3 — Good gloss, coarse grain surface.
Processing technology: polishing and tempering rolling for 2D or 2B with 100~120 abrasive materials (JIS R6002).
No.4 — Good gloss, fine lines on the surface.
Processing process: polishing and tempering rolling for 2D or 2B with 150~180 abrasive materials (JIS R6002).
HL — Silver grey with hair streaks.
Processing technology: 2D products or 2B products with appropriate granularity of abrasive materials for polishing the surface is a continuous abrasive grain.
MIRRO — Specular.
Processing technology: 2D products or 2B products with appropriate granularity of the grinding material grinding and polishing to the mirror effect.

Price List

Stainless Steel 430 coil Price List 430coil FOB Shanghai Per Unit (USD)
430 stainless steel coil $1200.00-$1800.00
430 mirror stainless steel coil $1500.00-$2000.00
Stainless Steel coil 430 $1200.00-$1800.00
4×8 430 stainless steel sheet $1200.00-$1800.00

Table of Contents

1）Equivalent Grades
2）Standard Specification
3）Composition Content
4）Characteristic Machining Technology
5）Price List

Warehouse Storage

PT PUSAT BESI BAJA is a large production enterprise with 20 branches. The company not only has its own factories inVietnam, Malaysia, the United Kingdom, the United States, etc, but also in China, Southeast Asia andEurope, covering an area of 200,0000 square meters. Company mainly deals in the export of steel plate stainless steelcoil, galvanized col, corrugated plate, color-coated steel plate, tinplate col, cold and hot steel plateprofiles, profiles, building materials and various pipes.

Get Information